玻璃雨棚是現在比較熱門的一種雨棚的種類，這種雨棚的樣式是比較的有特點的，看起來也是比較的賞心悅目的，所以玻璃雨棚在市場上還是非常的受歡迎的一種雨棚。玻璃雨棚一般就是使用在建筑物的大門處的，有很好的遮風擋雨的效果。下面小編就來給大家介紹一下玻璃雨棚在市場上的是多少，還有就是玻璃雨棚的結構是什么樣的，以及玻璃雨棚的安裝方法是什么樣的。

　　Glass canopy is a popular type of canopy nowadays, with a distinctive style that looks pleasing to the eye. Therefore, glass canopy is still a very popular type of canopy in the market. Glass canopies are usually used at the entrance of buildings and have a good effect of blocking wind and rain. Below, the editor will introduce to you the price of glass canopies in the market, as well as the structure and installation method of glass canopies.

　　玻璃雨棚的

　　The price of glass canopy

　　玻璃的一般在每平米200元到500元之間，再加上鋼結構成本，玻璃雨棚平均在每800元到2000元之間。(來源網絡，僅供參考。)

　　The price of glass is generally between 200 and 500 yuan per square meter, plus the cost of steel structure, the average price of glass canopy is between 800 and 2000 yuan per square meter. (Price source online, for reference only.)

　　另外安裝玻璃雨棚是要支付費用的，根據安裝面積大小，需要使用到的設備和人力不同，安裝費用也是不同的。有的廠家提供安裝服務，有些廠家會收取一部分費用，這要根據各個地區的具體情況決定

　　In addition, installing a glass canopy requires payment, and the installation cost varies depending on the size of the installation area, the equipment and manpower required. Some manufacturers provide free installation services, while others charge a portion of the fee, which depends on the specific situation in each region

　　玻璃雨棚的結構

　　Structure of glass canopy

　　普通的玻璃的確是很容易碎，受到重力撞擊更是不堪一擊。但是玻璃雨棚使用的玻璃可不是普通玻璃，而是鋼化玻璃和夾膠玻璃。鋼化的玻璃的強度和抗壓能力比普通玻璃高出數倍，有的鋼化玻璃甚能承受人流在上面走動。所以玻璃雨棚的堅固性大家可以放心。夾膠玻璃是雙層玻璃，中間有一層膠狀物質大大提高了它的各項性能，抗壓能力也很強。

　　Ordinary glass is indeed very fragile, and it is even more vulnerable to gravity impact. But the glass used in the glass canopy is not ordinary glass, but tempered glass and laminated glass. The strength and compressive strength of tempered glass are several times higher than ordinary glass, and some tempered glass can even withstand people walking on it. So you can definitely rest assured about the durability of the glass canopy. Laminated glass is a double-layer glass with a layer of adhesive material in the middle that greatly improves its various properties and has strong compressive strength.

　　玻璃雨棚的框架結構是使用鋼結構，主梁、次梁和柱子都是鋼材和鋼管，所以玻璃雨棚的框架結構也非常牢固，抗腐蝕能力也很強，不用擔心受水份和酸堿物質腐蝕破壞。

　　The frame structure of the glass canopy is made of steel, with the main beam, secondary beam, and columns all made of steel and steel pipes. Therefore, the frame structure of the glass canopy is also very sturdy and has strong corrosion resistance, so there is no need to worry about being corroded by moisture and acidic substances.

　　玻璃雨棚的安裝方法

　　Installation method of glass canopy

　　1、加工準備及下料:按照施工圖放樣，放樣和號料時要預留焊接收縮量和加工余量，根據放樣作樣板鋼材下料前必須行矯正，矯正后的偏差值不應超過規范規定的允許偏差值，以保證下料的質量。熱加工的型鋼先熱加工，待冷卻后再號孔。鋼板預埋件及其他零件切割鉆孔及防腐漆處理。

　　1. Processing preparation and cutting: According to the construction drawing, welding shrinkage and processing allowance should be reserved during the layout and marking process. Before cutting the sample steel according to the layout, it must be corrected first. The corrected deviation value should not exceed the allowable deviation value specified in the specifications to ensure the quality of the cutting. Hot processed steel sections are first hot processed and then drilled after cooling. Cutting, drilling, and anti-corrosion coating treatment of steel plate embedded parts and other components.

　　2、測量放線:根據土建標高基準線測預埋件標高中心線，檢查預埋件標高偏差、左右偏差。整理結果確定預埋件分隔的調整處理方案。沿樓板外沿彈出墨線定出預埋件頂標高線。

　　2. Measurement and laying out: Measure the centerline of the embedded part elevation based on the civil engineering elevation reference line, and check the elevation deviation and left-right deviation of the embedded part. Organize the results to determine the adjustment plan for the separation of embedded parts. Draw a chalk line along the outer edge of the floor slab to determine the top elevation line of the embedded parts.

　　3、預埋件安裝處理:定位預埋件安裝位置，打鉆安裝。要求預埋件位置準確、埋設牢固。標高偏差不大于9mm，左右位移不大于20mm。

　　3. Installation and treatment of embedded parts: locate the installation position of embedded parts and drill for installation. Require accurate positioning and firm embedding of embedded parts. The elevation deviation shall not exceed 9mm, and the left and right displacement shall not exceed 20mm.

　　4、懸掛臂安裝焊接:懸掛臂安裝采用焊接，需檢査焊接節點，調節懸掛臂設計坡度，準確無誤方能進行焊接?？窟呉粭l懸掛臂準確無誤后，安裝另一邊一條懸掛臂，就位準確后點焊。然后以此兩條懸掛臂為基準拉出懸掛臂的、標高線，--焊接剩余懸掛臂。并焊接無縫鋼管。型鋼需接長時，先焊接頭并矯直。采用型鋼接頭時，為使接頭型鋼與鋼板預埋件緊貼，應按設計要求鏟去楞角。對接縫應在縫的兩端焊上引弧板，其材質和波口型式與焊件相同，焊后氣割切除并磨平。

　　4. Installation and welding of suspension arm: Welding is used for the installation of suspension arm. The welding nodes need to be checked, and the design slope of the suspension arm needs to be adjusted accurately before welding can be carried out. After the one suspension arm on the side is accurate and correct, install the other suspension arm on the other side, and spot weld it accurately after positioning. Then use these two suspension arms as a reference to pull out the highest and lowest elevation lines of the suspension arms, and weld the remaining suspension arms. And weld seamless steel pipes. When the section steel needs to be extended, weld the joint first and straighten it. When using steel joints, in order to ensure that the joint steel is tightly attached to the steel plate embedded parts, the edges and corners should be removed according to the design requirements. The butt joint should be welded with arc plates at both ends of the joint, with the same material and groove type as the welded part. After welding, it should be cut off by gas cutting and ground flat.

　　5、校準檢驗:懸掛臂安裝后檢査現場連接部位的質量。懸掛臂安裝質量主要檢査懸掛臂豎向面的不垂直度;受壓對懸掛臂豎向面的側面下垂,懸掛臂坡度。保證懸掛臂符合設計受力狀態及整體穩定要求。

　　5. Calibration inspection: After installing the suspension arm, first check the quality of the on-site connection parts. The installation quality of the suspension arm mainly checks the non perpendicularity of the vertical surface of the suspension arm; The lateral sagging of the vertical surface of the suspension arm under pressure, and the slope of the suspension arm. Ensure that the suspension arm meets the design stress state and overall stability requirements.

　　6、連接受力拉索:定位拉桿基準線、標高線，按要求安裝預埋件，焊接欄桿

　　6. Connect the tension cable: locate the reference line and elevation line of the tension rod, install the embedded parts as required, and weld the railing

　　7、不銹鋼玻璃爪安裝焊接:按設計尺寸彈出縱橫線及設計標高，用夾具夾緊，進行定位點焊，裝配完畢，焊接玻璃爪底座。

　　7. Installation and welding of stainless steel glass claws: Draw vertical and horizontal lines and design elevations according to the design dimensions, clamp them with fixtures, perform positioning spot welding, and after assembly, weld the glass claw base.

　　8、防銹噴漆處理:應熔渣及飛濺物，不銹鋼件表面噴白漆多遍防銹噴漆處理。涂料及漆膜厚度應符合設計要求或施工規范的規定。以肢型鋼內側的油漆不得漏涂。

　　8. Rust proof spray painting treatment: Slag and splashes should be removed, and the surface of stainless steel parts should be sprayed with white paint multiple times for rust proof spray painting treatment. The thickness of coatings and paint films should comply with the design requirements or construction specifications. The paint on the inner side of the limb steel shall not be missed.

　　9、夾膠玻璃加工制作安裝:按設計要求結合實測尺寸確定玻璃尺寸，以及的水平、垂直位置，廠家加工制作。安裝不銹鋼玻璃爪，玻璃臨時固定后進行調整，調整標準平、豎直、面平。偏差不得超過規定偏差。

　　9. Processing, manufacturing, and installation of laminated glass: Determine the glass size and its horizontal and vertical positions according to the design requirements and actual measurement dimensions, and manufacture them by the manufacturer. Install stainless steel glass claws, adjust the glass temporarily after fixing, and adjust the standard to be flat, vertical, and flat. The deviation shall not exceed the specified deviation.

　　10、調整檢驗:點式玻璃進行整體調整檢驗，調整標準平、豎直、面平。差不得超過規定偏差。

　　10. Adjustment inspection: Conduct overall adjustment inspection on point glass, adjusting the standard to be flat, vertical, and flat on the surface. The deviation shall not exceed the prescribed limit.

　　11、上下打膠:充分清潔玻璃間縫隙，不應有水、油漬、涂料、鐵銹、水泥砂漿、灰塵等。充分清潔粘結面，加以干燥。為調整縫的深度，避免三邊粘膠。在縫兩側貼保護膠紙保護玻璃不被污染。上下同時打密封膠，注膠后將膠縫表面抹平，去掉多余的膠。注膠完畢，將保護紙撕掉，必要時用溶劑擦拭玻璃。膠在未完全硬化前，不要沾染灰塵和劃傷。

　　11. Top and bottom gluing: Thoroughly clean the gaps between the glasses, and there should be no water, oil stains, paint, rust, cement mortar, dust, etc. Thoroughly clean the bonding surface and dry it. To adjust the depth of the seam and avoid adhesive on three sides. Stick protective tape on both sides of the seam to protect the glass from contamination. Apply sealant both vertically and horizontally, then smooth out the surface of the joint and remove any excess glue. After gluing, tear off the protective paper and wipe the glass with solvent if necessary. Before the glue fully hardens, do not get it contaminated with dust and scratches.

　　12、修補檢驗:同部修補檢驗。

　　12. Repair inspection: Same part repair inspection.

　　13、玻璃清洗:整體清洗玻璃塵垢。必要時用溶劑擦拭玻璃,

　　13. Glass cleaning: overall cleaning of glass dust and dirt. Wipe the glass with solvent if necessary,

　　14、清理現場:保護和清洗現場，

　　14. Clean up the site: protect and clean the site,

　　15、竣工驗收:竣工驗收。

　　15. Completion acceptance: Completion acceptance.

　　玻璃雨棚在市場上的情況是什么樣的，還有就是玻璃雨棚的安裝流程以及要點有哪些，以及玻璃雨棚的結構有什么樣的特點，這些小編都已經在上文中給大家做了詳細的介紹了。玻璃雨棚不僅僅是在建筑物的大門處有使用，一些小型的建筑物的屋頂是會直接采用玻璃雨棚，這樣既美觀，又是非常的直接，是受到很多人的喜愛的設計，在市場上也是非常的受歡迎。

　　What is the price situation of glass canopies in the market, as well as the installation process and key points of glass canopies, and what are the structural characteristics of glass canopies? These have all been introduced in detail by the editor in the previous text. Glass canopies are not only used at the entrance of buildings, but also on the roofs of some small buildings. This design is not only beautiful but also very direct, and is loved by many people. It is also very popular in the market.

　　本文由 濟南雨棚  友情奉獻.更多有關的知識請點擊  http://www.jyxingyu.com/    真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is dedicated by Jinan Rainshed Friendship For more related knowledge, please click http://www.jyxingyu.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.