膜結構車棚在搭建的時候一般都會運用鋼結構的骨架，那么在搭建的時就需要留意緊固鋼結構，那么我們?cè)撊绾渭庸棠そY(jié)構車棚的骨架呢?其實膜結構車棚鋼結構骨架加固辦法除了改動車棚鋼結構骨架結構計算圖形辦法，還有幾種，下面膜結構廠家小編介紹具體內容如下：

When constructing a membrane structure carport, steel structure skeleton is usually used. Therefore, it is necessary to pay attention to fastening the steel structure during construction. So, how can we reinforce the skeleton of the membrane structure carport? In fact, in addition to changing the calculation graphic method of the steel structure skeleton structure of the shed, there are several reinforcement methods for the steel structure skeleton of the membrane structure shed. The details of the lower facial mask structure manufacturer are as follows:

1、銜接加固與加固件銜接。

1. Connection reinforcement and reinforcement connection.

鋼結構銜接辦法，就是焊縫、鉚釘、普通螺栓和高強度螺栓銜接辦法挑選，要根據需要加固的原因目的、結構以及施工條件，同時還需要考慮結構原有的銜接辦法確認。

The selection of connection methods for steel structures, including welding seams, rivets, ordinary bolts, and high-strength bolts, should be based on the reasons, purposes, structure, and construction conditions that require reinforcement, while also considering the confirmation of the original connection methods for the structure.

鋼結構加固一般比較適合選用焊縫銜接、沖突型高強度螺栓銜接，也可以根據焊縫和沖突型高強度螺栓混合銜接，當選用焊縫銜接時，選用經評定認可焊接工藝及銜接資料。

Steel structure reinforcement is generally more suitable for using welded joints, conflict type high-strength bolts, or mixed joints based on welded joints and conflict type high-strength bolts. When using welded joints, approved welding processes and connection materials should be selected.

2、加大構件截面加固。

2. Strengthen the cross-section of the component by increasing its size.

在選用加大截面加固鋼構件的時分，關于所挑選的截面形式要有利于加固技能要求，還要考慮已經有的缺陷和損害的情況。

When selecting steel components with enlarged cross-sections for reinforcement, the selected cross-sectional form should be conducive to the requirements of reinforcement skills, and the existing defects and damages should also be considered.

3、裂紋修正與加固。

3. Crack correction and reinforcement.

膜結構車棚鋼結構骨架由于荷載重復效果以及資料的挑選、結構、制作、施工裝置不妥等而發生脆斷傾向星裂紋損害，要設法去修正，修正之前要分析發生的裂紋的原因以及嚴重性，有針對性的采取改善結構實際工作或進行膜結構車棚加固辦法，不適宜選用修正加固的構件，要給予撤除替換。

The steel structure skeleton of the membrane structure carport is prone to brittle fracture and cracking damage due to repeated load effects and improper selection of data, structure, production, and construction equipment. It is necessary to try to correct it. Before correction, the cause and severity of the cracks should be analyzed, and targeted measures should be taken to improve the actual structure or reinforce the membrane structure carport. Components that are not suitable for correction and reinforcement should be removed and replaced.

本文由濟南雨棚提供技術支持，更多精彩內容請繼續關注我們的http://www.jyxingyu.com，我們后續會有更多精彩內容給您展現.

This article is provided with technical support by Jinan Rainshed. For more exciting content, please continue to follow us http://www.jyxingyu.com We will have more exciting content to showcase to you in the future